Got a good lcd or dlp projector? Do you want to know how to make your own cheap projector screen / diy projector screen? Here’s how (these directions make a 3:4 screen with approx 80 inch diagonal–adjust to your own specifications):

What you need:

  • Two (2) yards of 54″ white/white budget blackout cloth – from – normal price $5.99/yd ($2.99 with 50% coupon code from Total: $5.98+shipping/tax= $14
  • Three (3) 1″x3″x8′ firring strips from Home Depot – $1.34/ea Total: $4.02+tax = $5
  • 20 or so 1/2″ wood screws, Total: $1
  • Scrap 1/4″ plywood, 1 sq ft is enough Total: Free
  • Staple Gun with staples (assume you have this already, if not, I got the Arrow Fastener T50 Heavy Duty Staple Gun for about $20)- it’s a workhorse, built to last
  • Saw
  • Hammer
  • Straight edge
  • Tape measure


    1. Start by measuring the firring strips to the appropriate lengths. To make an 80 inch diagonal 3:4 ratio DIY projector screen, you’ll need two 43″ lengths (sides) and two 64″ lengths (top and bottom).
    2. Cut the firring strips to the measured lengths
    3. Cut 4 right angle triangles from the plywood, large enough to support the corners.
    4. Attach the plywood triangles to the corners of the frame using the wood screws, being sure to attach the screws so as to secure the frame tightly in place.

DIY Projector Screen - Corner Construction

    1. Unroll the blackout cloth, smoother side down on a large, clean carpeted area. Place wooden frame face-down, centered onto the cloth.

DIY Projector Screen - Laying out the blackout cloth

    1. Fold one side up over the frame and staple, starting from the middle and working out. Tap staples down with hammer to tighten grip.
    2. On the opposite side of the frame, firmly pull the cloth tightly over the frame and staple, again from middle outward, being sure to fix any wrinkles. Once it looks tight and flat, hammer down the staples on this side also.
    3. Repeat steps 6 and 7 for the remaining sides, being sure pull the cloth as tight as possible by hand.
    4. Finish the corners with staples to hold the fabric folds.

DIY Projector Screen - Stapling Corners

    1. (Optional) Cut excess cloth with a utility knife, being sure not to nick your screen.
    2. Hang and project on your new $20 DIY projector screen.

DIY Projector Screen - Final Product